Technical service manual (90003011 Rev D) covering cabinet information, parts, and hard drive procedures across all Megatouch Force product models.
Merit Industries, Inc.
2525 State Rd.
Bensalem, PA 19020-8529
(215) 639-4700; (800) 523-2760
http://www.meritind.com
90003011 Rev D
Section 1 - Cabinet Information
General Information- All FORCE Products
Dimensions/Shipping Weights
General Information - FORCE Classic
Parts Illustrations
General Information - FORCE Elite
Parts Illustrations
General Information - FORCE Radion
Parts Illustrations
General Information - FORCE Upright
Parts Illustrations
General Information - The Vibe
Parts Illustrations
General Information - EVO
Parts Illustrations
General Information - EVO Wallette
Parts Illustrations
General Information - FORCE Upright Fusion
Parts Illustrations
General Information - Mr. VIPS
Parts Illustrations
General Information - Merit/TouchTunes Products
Parts Illustrations
FORCE Parts List
Section 2 - Hard Drive Information
Hard Drive Numbers
Program Numbers
Part Numbers
Security Key Numbers
Section 3 - Troubleshooting Information
Touchscreens
Troubleshooting
Advanced Touchscreen Calibration
Motherboard Handling Precautions
Motherboard Diagrams
Removal/Installation of Major Assemblies
DIP Switch Settings in FORCE Games
Troubleshooting Guide (FORCE 2002 and earlier)
Troubleshooting Guide (FORCE 2003 and later)
TouchTunes® Troubleshooting Guide
CMOS Setup
Mars 2000 Bill Acceptor
DIP Switch Settings
Section 4 - Power Supply
Power Supply Used in FORCE Games
Enhance SFX-1211J
Enhance ENP-0812A
Section 5 - Motherboard
Circuit Board Cross Reference Chart
Motherboard Diagrams
I/O Board Diagrams
Section 6 - Monitors
Monitors Used in FORCE Games
Monitor Adjustments
Degaussing
Monitor Adjustment Procedures
Section 7 - Technical Service Bulletins
FLDBLL 24 - Problem with Megatouch FORCE
2002 software release
TN 52 - Installing the Power-On Harness on an
ECS Motherboard
FLDBLL 25 - Software bug affecting high scores
TN 55 - Replacing the I/O Board on a Megatouch
FORCE Game
FLDBLL 26 - Fix for Software bug affecting high
scores
FLDBLL 27 - Problem with MARS series 2000 Bill
Acceptor
TN 56 Rev. A - Replacing the Monitor Chassis
Board in FORCE Radion Games
TN57 - New Jersey games and coin mech and bill
acceptor operation
TN60 - Radion monitor chassis board replacement
FLDBLL 29 - Canadian FORCE 2003 and Ruby
security keys
FLDBLL 30 - FORCE Radion Games with
Incorrect Circuit Breakers
TN58 - Software Updates While Running
Championship Tournaments
TN67 - Replacing the Control Board in Megatouch
Combo Jukebox and MegaTunes Units
TN72 - I/O Board Replacement in FORCE EVO
and Fusion Games
TN76 - FORCE 2004 Point 5/Sapphire 2 Update
Disc
TN53 Rev M - How to Read a Game Serial
Number
TN65 Rev. D - DIP switch settings in FORCE and
MAXX games
FLDBLL 34 - FORCE 2005 and Jade
Championship Edition Software Bug
FLDBLL 33B - FORCE 2005 and Jade Software
Bug
FLDBLL 35B - TouchTunes® Interconnectivity
License Expiration
Megatouch FORCE Technical Service Manual Contents
Section 1
Cabinet Information
General Information - All FORCE Products
Dimensions/Shipping Weights
General Information - FORCE Classic
Parts Illustrations
General Information - FORCE Elite
Parts Illustrations
General Information - FORCE Radion
Parts Illustrations
General Information - FORCE Upright
Parts Illustrations
General Information - The Vibe
Parts Illustrations
General Information - FORCE EVO
Parts Illustrations
General Information - FORCE EVO Wallette
Parts Illustrations
General Information - FORCE Upright Fusion
Parts Illustrations
General Information - Mr. VIPS
Parts Illustrations
General Information - Merit/TouchTunes Products
Parts Illustrations
FORCE Parts List
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information Section
General Information
Cabinet Information - General Information - All Cabinet Styles
Megatouch FORCE Technical Reference Manual
Megatouch FORCE Classic
Dimensions: D=20”; W=21”; H=16”
Shipping dimensions: D=23”; W=26; H=22”
Shipping weight: 100 lbs.
Megatouch FORCE Elite
Dimensions: D=17.5”; W=16”; H=15.5”
Shipping dimensions: D=18.5”; W=21”; H=20”
Shipping weight: 75 lbs.
Megatouch FORCE Radion
Dimensions: D=18”; W=20”; H=15.25”
Shipping dimensions: D=23”; W=26”; H=22”
Shipping weight: 90 lbs.
Megatouch FORCE Upright
Dimensions: D=29”; W=23”; H=62”
Shipping dimensions: D=30.5”; W=26”; H=65.5”
Shipping weight: 270 lbs.
The Vibe
Terminal: D=7”; W=14”; H=16”
Processor: D=15”; W=11.5”; H=4.5”
Shipping weight: 50 lbs.
Megatouch FORCE EVO
Dimensions: D=15”; W=16.5”; H=18.5”
Shipping weight: 75 lbs.
Megatouch FORCE EVO Wallette
Dimensions: D=9”; W=16.5”; H=19”
Shipping weight: 65 lbs.
Megatouch FORCE Upright Fusion
Dimensions: D=21”; W=20”; H=61”
Shipping weight: 200 lbs.
Megatouch FORCE Fun Zone
Dimensions: D=21”; W=25”; H=67
Shipping weight: 175 lbs.
Megatouch FORCE Fun Zone Jr.
Dimensions: D=22”; W=25”; H=43.75”
Megatouch Mr. VIPS
Dimensions: D=30”; W=28”; H=79”
Megatouch Combo Jukebox
Dimensions: D=26”; W=25”; H=71.25”
Shipping Dimensions: D=28.5”; W=35.5”;
H=78.5”
Shipping weight: 425 lbs.
MegaTunes
Dimensions: D=15.5”; W=20.25”; H=4.75”
Remote Sound System
Cabinet Dimensions: D=23”; W=23”; H=26.5”
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - FORCE Classic
Megatouch FORCE Technical Reference Manual
Megatouch FORCE Classic
Dimensions: L - 20”; W - 21”; H - 16”
Shipping weight: 100 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE CLASSIC COUNTERTOP
Cabinet Information - General Information - FORCE Classic
Megatouch FORCE Technical Reference Manual
SA0108-04
(main harness)
MW0010-02-0J
(monitor frame)
SA0313-01
(speaker assembly)
HW8993-02
(lazy susan)
HW8018-02
(anti-skid pad)
HW8741
(lock)
CN4452-01
(phone coupler)
CN4451-01
(Ethernet coupler)
EC3040
(circuit breaker)
SA0225-06
(AC harness)
MW0015-01
(lock bracket)
MW0038-01
(cord clip)
MW0009-02-0D
(chassis)
EC9154-03
(counter)
SA0226-04
(DC harness)
SA0103-07
(monitor & touchscreen)
EC9377-08
(monitor)
SA9824-01
(touchscreen)
HW8953-03
SA5129-01
(bezel & gasket)
SA5117-04-0A
(fan assembly
EC9402-03
(fan)
HW8989
(fan guard)
MW0014-02-0B
(left latch plate)
MW0014-01-0B
(right latch plate)
EC2198-01
(centronics ribbon cable)
SW4084
(ON/OFF switch)
EC7531-03
SA0106-12
(power supply)
SA10055-01
(I/O board)
EC9840-08
(touchscreen controller)
SA10057-05
(motherboard)
WD0001-05
(right side panel)
SA0117-01
(fan power harness)
WD0001-06
(left side panel)
MW0016-01-0C
(door)
HW8734-01
(lock)
MW0024-01
(cam)
GL3100-47
(FORCE 2005 decal)
PA3024-01
(FORCE 2006
hard drive)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE CLASSIC COUNTERTOP
Cabinet Information - General Information - FORCE Classic
Megatouch FORCE Technical Reference Manual
EC9796-01
(bill acceptor)
MW0055-01
HW8727
(lock & cam)
MW0052-01-0A
(coinbox & bill acceptor door)
HW1501-01
(cotter pin)
MW0043-01
(coinbox stop)
HW8314-01
(extension spring)
MW0020-01-0B
(coin chute entry, left)
HW8159-01
(coin rejector)
MW0021-01
(coin chute entry, right)
HW0004-01-0A
(bill acceptor bezel)
FRONT FACE
HW0003-01
(coin return button)
SA0047-02-0A
(coin & bill acceptor harness)
KUV-107-001
(cash box assembly
w/ bill acceptor)
SA0040-08
(cash box assembly only,
bill acceptor-ready)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Megatouch FORCE Elite
Dimensions: L - 17.5”; W - 16”; H - 15.5”
Shipping weight: 75 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Elite
Megatouch FORCE Technical Reference Manual
FORCE ELITE COUNTERTOP
SA0237-04
MP0002-07
(top cover)
MP0009-05
(bezel)
SA0238-05
MP0013-03
(bottom front cover)
SA0235-05
(monitor assembly)
(LCD monitor)
EC9850-04
(touchscreen)
EC9381-02
MW0323-01
(lock bar)
MW0351-04
(rear door)
SA0241-06
MP0001-10
(side cover)
MW0343-01
(coin flap)
MW0339-01
(coin cup)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE ELITE COUNTERTOP
Cabinet Information - General Information - Megatouch FORCE Elite
Megatouch FORCE Technical Reference Manual
SA0267-03
EC7531-03
(power supply)
SA4084
(speaker)
SA5117-08
SA0279-01
(fan)
SA10057-05
(motherboard)
MW0425-01
(chassis)
MW0327-01
(coin return chute)
EC2198-01
(centronics ribbon cable)
HW8993-02
(lazy susan)
HW8018-02
(anti-skid pad)
SA0241-05
MP0001-09
(left side cover)
SA0242-06
(power entry assembly)
CN4451-01
(Ethernet coupler)
SA0298-02
EC9796-04
(bill acceptor)
SA10055-01
(I/O board)
HW8733-05
(lock)
SA10058-01
(audio amp board)
SA0240-05
(coin drawer)
EC3040
(circuit breaker)
EC2008-01
(line cord)
HW8159-01
(domestic coin mech)
HW8317-XX
(electronic coin mech--
international only)
MW0324-02
(coin entry plate)
SW4024
(ON/OFF switch)
EC9840-08
(touchscreen controller)
MW0447-01
(power supply bracket)
CN4452-02
(phone coupler)
SA0331-01
(hard drive assembly)
MW0494-01
(hard drive bracket)
PA3024-01
(FORCE 2006 hard drive)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE Radion
Dimensions: L - 18”; W - 20”; H - 15.25”
Shipping weight: 90 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Radion
Megatouch FORCE Technical Reference Manual
FORCE RADION COUNTERTOP
(Ethernet coupler)
(circuit breaker)
EC3040
CN4451-01
(ON/OFF switch)
SW4024
SA10055-01
(I/O board)
SA0304-03
(power entry module)
(phone coupler)
CN4452-01
SA10057-05
(motherboard)
HW8018-05
(anti-skid pad - 2 per)
CN0002-01
(IEC connector)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE RADION COUNTERTOP
Cabinet Information - General Information - Megatouch FORCE Radion
Megatouch FORCE Technical Reference Manual
SA0338-01* (coin box & bill acceptor--
for games produced before October 7, 2002)
SA0338-07 (oversized coin box & bill acceptor--
for games produced after October 7, 2002)
SA0338-11 (oversized coin box w/o bill acceptor--
for games produced after November 27, 2002)
EC9796-01 (bill acceptor only)
MW0475-01* (metalwork only)
MW0566-01 (metalwork only--large)
MW0471-01
(coin return chute)
SA0329-02
(monitor & touchscreen)
EC9387-01
(monitor)
EC9850-03
(touchscreen)
MW0470-01
(coin chute)
MW0020-01
(coin return lever)
MP0019-01
(coin entry plate)
EC9154
(counter)
MP0017-01
(rear door)
HW8159-01
(coin mech)
*If desired, an oversized coinbox upgrade kit can
be ordered:
KUV-112-000-01 includes coinbox only--
hardware (lock, etc.) would be reused.
KUV-112-001-01 includes bill acceptor, coinbox,
and hardware.
EC9387-01
(monitor assembly)
MW0542-01
(hard drive bracket)
EC2198-05
(centronics ribbon cable)
SA0326-01
MP0015-01
(rear door & bezel)
SA0327-01
MP0014-01
(front bezel)
SA0308-01
EC7531-03
(power supply)
EC0056-03
(DIMM)
PA3024-01
(FORCE 2006
hard drive)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE RADION COUNTERTOP
Cabinet Information - General Information - Megatouch FORCE Radion
Megatouch FORCE Technical Reference Manual
HW8733-05 (right side lock)
MW0482-01 (right side cam)
HW8721 (left side lock)
MW0472-01 (left side cam)
SA0324-01 (right plastic side
w/ latching hardware)
MP0018-02 (right plastic side only)
SA0325-01 (left plastic side
w/ latching hardware)
MP0018-01 (left plastic side only)
GL3100-51
GL3100-52 (left and right
FORCE 2006 decal)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE RADION COUNTERTOP
Cabinet Information - General Information - Megatouch FORCE Radion
Megatouch FORCE Technical Reference Manual
MW0521-01
(bill acceptor
alignment bracket)
MP0021-02
(combo plate)
EC0051-01
(USB cable)
EC9840-08
(touchscreen
controller)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE Upright w/o Coin Door
Dimensions: L - 29”; W - 23”; H - 62”
Shipping weight: 270 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Upright
Megatouch FORCE Technical Reference Manual
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE UPRIGHT W/O COIN DOOR
Cabinet Information - General Information - Megatouch FORCE Upright
Megatouch FORCE Technical Reference Manual
SA3243-03
(bezel)
MW0305-01
(coin chute)
WD0030-02
(left side panel)
HW8741
(coinbox lock)
SA3248-01
MW0374-01
(coinbox)
HW8716
(lock)
SA4084
EC9250
(speaker--both sides)
GL3016-05
(FORCE decal)
WD0030-01
(right side panel)
MW0095-01
(stay arm)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE UPRIGHT W/O COIN DOOR
Cabinet Information - General Information - Megatouch FORCE Upright
Megatouch FORCE Technical Reference Manual
HW8733-04
(lock)
MW0023-0
(lock bolt)
HW8249
(coin rejector)
GL2411-05
GL2411-06
(marquee holders,
front & back)
GL2432-05
(FORCE 2004
marquee)
SA5117-05-0A
(fan assembly)
SA0197-01
(fan cover)
SA0177-04-OA
(lamp assembly)
LB1030-01
(bulb)
SA3247-07
WD0024-03
(cabinet)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE UPRIGHT W/O COIN DOOR
Cabinet Information - General Information - Megatouch FORCE Upright
Megatouch FORCE Technical Reference Manual
EC9382-01
SA3244-03
(monitor)
EC9840-10
(touchscreen controller)
EC9844-01
(touchscreen)
SB0016-01
(touchscreen tape)
MP0024-01
(bezel)
SA10057-05
(motherboard)
EC7531-03
(power supply)
EC0056-01
(DIMM)
EC2198-01
(centronics ribbon cable)
EC0051-01
(USB cable)
SA10058-01
(audio amp board)
SA10055-01
(I/O board)
PA3024-01
(FORCE 2006 hard drive)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE Upright w/ Coin Door
Dimensions: L - 29”; W - 23”; H - 62”
Shipping weight: 270 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Upright w/ Coin Door
Megatouch FORCE Technical Reference Manual
FORCE UPRIGHT W/ COIN DOOR
SA4084
EC9844-01
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FORCE UPRIGHT W/ COIN DOOR
Cabinet Information - General Information - Megatouch FORCE Upright w/ Coin Door
Megatouch FORCE Technical Reference Manual
EC9844-01
(touchscreen)
MP0025-01
(bezel)
SB0016-01
(touchscreen tape)
EC9840-10
(touchscreen
controller)
EC9382-01
(monitor)
SA3244-03
(monitor & shelf assembly)
SA0331-04
(hard drive assembly)
PA3024-01
(hard drive)
MW0494-01
(hard drive bracket)
EC0051-01
(USB cable)
SA10055-01
(I/O board)
EC7531-03
(power supply)
SA10057-05
(motherboard)
EC2198-01
(centronics ribbon cable)
SA10058-01
(audio amp board)
SA0165-01
EC9154
(counter)
EC0056-01
(DIMM)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
The Vibe
Terminal Dimensions: D - 7”; W - 14”; H - 16”
Processor Dimensions: D - 15”; W - 11.5”; H - 4.5”
Shipping weight: 50 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - The Vibe
Megatouch FORCE Technical Reference Manual
THE VIBE
SA0392-01
(touchscreen & display)
EC9850-04
(touchscreen)
EC9381-04
(15" LCD display)
SA0405-01
(display harness)
SA0393-01
(electro-luminescent
display)
MP0027-01
(monitor bezel)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
THE VIBE
Cabinet Information - General Information - The Vibe
Megatouch FORCE Technical Reference Manual
SA0403-01
(switch assembly)
SA0389-01
(left speaker assembly)
EC9796-01
(bill acceptor)
MW0613-01
(bill acceptor bracket)
HW8733-05 (lock)
MW0597-01 (cam)
MW0613-01
(bill acceptor lock bracket)
MW0611-01
(lock plunger)
MP0028-01
(rear enclosure)
SA0389-02
(right speaker assembly)
EC9840-10
(touchscreen controller)
HW8733-05 (lock)
MW0610-01 (cam)
SA0391-01 (lock mech)
MW0652-01 (lock bracket)
MW0655-01 (catch lock bracket)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
THE VIBE
Cabinet Information - General Information - The Vibe
Megatouch FORCE Technical Reference Manual
SW4025-01
(on/off switch)
SA0400-01
(dual fan assembly)
CN4451-01
(Ethernet coupler)
HW8721
(lock)
MW0584-01
(cam*)
*not shown
EC3040
(circuit breaker)
MW0649-01
(access panel)
HW0057-02
(fan guard)
HW3151
(thumbnut)
SA0266-02
(IEC connector)
SA0388-01
(9-pin connector
from terminal)
EC3040
(circuit breaker)
CN4452-01
(phone coupler)
SA0402-01
(processor
cover assy.)
MW0575-02
(processor lid)
(motherboard assembly)
(processor base)
MW0575-03
(counter assembly)
SA0309-03
(FORCE 2006 hard drive)
PA3024-01
SA10055-01
EC0056-03
(CPU fan*)
(64MB memory*)
EC9401-07
SA10057-05
(I/O board)
(power supply)
EC7531-03
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
THE VIBE W/ COIN
Cabinet Information - General Information - The Vibe w/ Coin
Megatouch FORCE Technical Reference Manual
SA0449-01
(lock bracket assy.)
HW8733
(lock)
MW0679-01
(cam)
MW0671-01
(lock plunger)
HW9101-01
(retaining ring)
EC9840-10
(touchscreen controller)
SB0368-01
(coin bag assy.)
SA0452-01
(coin rejector-ready assy.)
HW8317-XX
(electronic coin
rejector mech.)
SA0451-01
(coin rejector assy.)
MP0039-01
(coin rejector bracket)
MP0037-01
(rear enclosure)
SA0403-01
(dual switch assy.)
SW3005
(single switch)
SA0389-01
(speaker assy.)
HW0056-01
(hinge)
EC0031-02
(A to D board)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
THE VIBE W/ COIN
Cabinet Information - General Information - The Vibe w/ Coin
Megatouch FORCE Technical Reference Manual
SA0400-01
(dual fan assembly)
(circuit breaker)
SW4025-01
(on/off switch)
HW8721
(lock)
MW0584-01
(cam*)
*not shown
MW0649-01
(access panel)
SA0388-01
(15-pin connector
from terminal)
HW0057-02
(fan guard)
EC3040
(circuit breaker)
HW3151
(thumbnut)
MW0680-01
(ribbon cable
adapter plate)
SA0456-01
(9-pin connector
from terminal)
SA0402-01
(processor
cover assy.)
MW0575-02
(processor lid)
CN4452-01
(phone
connector)
EC2198 01
(centronics
upgrade connector)
CN4451-01
(Ethernet
connector)
EC7531-03
(power supply)
SA0309-03
(counter assembly)
PA3024-01
(FORCE 2006 hard drive)
SA10055-01
(I/O board)
SA10057-05
(motherboard assembly)
EC0056-03
(64MB memory*)
EC9401-07
(CPU fan*)
MW0575-03
(processor base)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Megatouch FORCE EVO
Dimensions: D - 15”; W - 16.5”; H - 18.5”
Shipping weight: 75 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE EVO
Megatouch FORCE Technical Reference Manual
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE EVO
Megatouch FORCE Technical Reference Manual
PARTS FOUND IN ALL EVO MODELS
DETAIL VIEW OF
CONTROL BOARD
EC0102-01
(setup)
EC0102-01
(calibrate)
MW0747-01
(controller bracket)
EC9840-08
(touchscreen controller)
SA10066-01
(OSD board)
PA3024-01
(hard drive)
HW8721
(lock)
MW0783-01
(lock slide)
SA10057-07 (motherboard)
SA10065-01 (I/O board)
EC0094-01 (I/O cable)
PA0060-XX (modem)
EC0098-03 (modem cable)
EC9401-09 (CPU fan)
MW0781-01
(hinge--2 places)
MW0740-01
(LCD mounting bracket)
EC0101-01
(speaker assembly)
EC7536-01
(power supply)
SB0409-01
(domestic front and rear
plastic enclosure)
SB0409-02
(international front and rear
plastic enclosure)
SA0470-01
(fan assembly)
MW0753-02
(lock spacer)
EC2198-01
(IDE cable)
GL0041-01
(base decal)
GL0038-01
(clear marquee)
PM8950-16
(FORCE 2006 sign)
SA0477-01
(LCD & touchscreen)
SA0469-01
(LCD w/ brackets & cabling)
EC9850-04
(touchscreen only)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE EVO
Megatouch FORCE Technical Reference Manual
EVO WITH BILL AND COIN
EVO WITH COIN ONLY
MP0048-01
(coin mech enclosure)
MW0735-01
(coin lever)
MW0733-01
(coin entry face bracket)
SB0377-01
(domestic mechanical
coin mech)
HW8317-XX
(international/Canadian
electronic coin mech)
HW8733-07
(lock)
MW0726-01
(cam)
MP0047-01
(coin return chute)
EC0092-02
(power entry & ON/OFF switch)
*EC2018-01
(power cord--USA)
*not shown
EC0100-01
(counter assembly)
MW0743-01
(small coin box)
EC9796-01
(bill acceptor)
SA10067-01
(LED board)
GL0025-03
(Merit logo overlay)
*HW1310-03
(U-bolt)
*not shown
EC0099-01
(fan)
MP0045-01
(bill acceptor nose
--front view)
MP0049-01
(coin entry faceplate)
MW0812-01
(bill acceptor front plate)
HW8993-02
(lazy susan)
HW8018-02
(anti-skid pad)
MP0048-01
(coin mech enclosure)
HW8733-07
(lock)
MW0726-01
(cam)
MW0731-01
(large coin box)
EC0099-01
(fan)
EC0092-02
(power entry & ON/OFF switch)
*EC2018-01
(power cord--USA)
*not shown
EC0100-01
(counter assembly)
SB0377-01
(domestic mechanical coin mech)
HW8317-XX
(international/Canadian electronic coin mech)
HW8333-XX
(electronic coin mech--wet deck)
MW0733-01
(coin entry face bracket)
MW0735-01
(coin lever)
MW0731-01
(large coinbox)
MW0726-01
(lock cam)
MP0047-01
(coin return chute)
*HW1310-03
(U-bolt)
*not shown
MW0812-02
(coin mech front plate)
MP0049-01
(coin entry faceplate)
HW8993-02
(lazy susan)
HW8018-02
(anti-skid pad)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE EVO
Megatouch FORCE Technical Reference Manual
EVO WITH BILL ONLY
HW8733-07
(lock)
MW0724-01
(cam)
PRINTER PORT
USB PORT
CN4452-01
(phone coupler)
CN4451-01
(Ethernet coupler)
EC2198-01
(centronics upgrade
connector)
EC0102-01
(SETUP/CALIBRATE buttons)
MW0721-01
(tower cap)
MP0045-01
(bill acceptor nose
--front view)
EC9796-01
(bill acceptor)
EC0100-01
(counter assembly)
SA10067-01
(LED board)
GL0025-03
(Merit logo overlay)
HW8993-02
(lazy susan)
HW8018-03
(anti-skid pad)
MW0749-01
(module cover panel)
*HW1310-03
(U-bolt)
*not shown
MW0723-01
(bill acceptor front plate)
EC0092-02
(power entry & ON/OFF switch
*EC2018-01
(power cord--USA)
*not shown
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Megatouch FORCE EVO Wallette
Dimensions: D - 9”; W - 16.5”; H - 19”
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE EVO Wallette
Megatouch FORCE Technical Reference Manual
DETAIL VIEW OF
CONTROL BOARD
EC0102-01
(setup)
EC0102-01
(calibrate)
MW0747-01
(controller bracket)
EC9840-08
(touchscreen controller)
SA10066-01
(OSD board)
PA3024-01
(hard drive)
HW8721
(lock)
MW0783-01
(lock slide)
SA10057-07 (motherboard)
SA10065-01 (I/O board)
EC0094-01 (I/O cable)
PA0060-XX (modem)
EC0098-03 (modem cable)
EC9401-09 (CPU fan)
MW0781-01
(hinge--2 places)
MW0740-01
(LCD mounting bracket)
EC0101-01
(speaker assembly)
EC7536-01
(power supply)
SB0409-01
(domestic front and rear
plastic enclosure)
SB0409-02
(international front and rear
plastic enclosure)
SA0470-01
(fan assembly)
MW0753-02
(lock spacer)
EC2198-01
(IDE cable)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE EVO Wallette
Megatouch FORCE Technical Reference Manual
EVO WALLETTE
MP0076-01
(upper cover)
HW8159-01
(coin mech)
MW0919-01
(coin mech bracket)
SW5021-01
(coin switch)
HW8727-03 (lock)
HW8757 (cam)
MW0914-01
(coin box)
MW0937-01
(lock slide riser)
EC9793-04
(bill acceptor)
MW0911-01 (back of
B/A bracket)
HW4206 (screws)
SA0514-01 (B/A harness)
HW4343
(screws securing B/A)
MP0075-01
(lower cover)
MW00908-01
(hinge riser)
SA0515-01
(main harness)
MW0913-01
(coin chute)
EC9304-05
(line filter)
SA0511-01 (AC
jumper harness)
SW4025
(on/off switch)
CN4452-01
(phone coupler)
EC2019-01
(power cord)
MW0905-01
(back plate)
HW2031-01
grommet
CN4451-01
(ethernet coupler)
MW0929-01
(lock catch)
HW4429
(2 screws)
MW0915-01
(back plate hinge)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE EVO Wallette
Megatouch FORCE Technical Reference Manual
EVO WALLETTE
SA0477-01
(LCD & touchscreen)
SA0469-01
(LCD w/ brackets)
EC9850-04
(touchscreen)
EC0096-01
(VGA cable)
EC0097-06
(osd cable)
MW0935-01
(coin rejector button)
HW9101-01
(retaining clip)
MP0075-01
(bottom cover)
MW0912-02
(B/A face plate)
MW0312-01
(blanking plate)
MW0916-01
(housing slide)
PM8950-XX
marquee
GL0038-01
plexi-glass
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Megatouch FORCE Elite Edge
Dimensions: D - 15”; W - 18”; H - 18”
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Elite Edge
Megatouch FORCE Technical Reference Manual
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE Elite Edge
Megatouch FORCE Technical Reference Manual
EC9796-06
(bill acceptor)
EC9702-XX
(Smiley bill acceptor)
CN4451-01
(Ethernet coupler)
CN4452-01
(phone coupler)
SW4025-02
(power switch)
EC2198-01 (centronics
upgrade connector)
EC0100-01 (meter)
MW0961-01 (bracket)
MW0721-01
(B/A-only cap)
HW8993-02 (lazy susan)
HW8018-02 (skid pad)
*not shown
EC2008-XX
(international power cord)
EC2001
(domestic power cord)
MW0969-01
(hinge bracket -
bill acceptor only)
HW1310-01 (u-bolt)
HW3300 (hexnut
HW3301 (kepnut)
GL3100-54
FORCE 2006
decal
HW0903-01(safety cover)
DETAIL VIEW OF
CONTROL BOARD
EC0102-01
(setup)
EC0102-01
(calibrate)
MW0747-01
(controller bracket)
EC9840-08
(touchscreen controller)
SA10066-01
(OSD board)
PA3024-01
(hard drive)
HW8721
(lock)
MW0783-01
(lock slide)
SA10057-07 (motherboard)
SA10065-01 (I/O board)
EC0094-01 (I/O cable)
PA0060-XX (modem)
EC0098-03 (modem cable)
EC9401-09 (CPU fan)
MW0781-01
(hinge--2 places)
MW0740-01
(LCD mounting bracket)
EC0101-01
EC7536-01
(power supply)
SB0409-01
(domestic front and rear
plastic enclosure)
SB0409-02
(international front and rear
plastic enclosure)
SA0470-01
(fan assembly)
MW0753-02
(lock spacer)
EC2187-01
(IDE cable)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE Elite Edge
Megatouch FORCE Technical Reference Manual
SA0477-01
(LCD & touchscreen)
SA0469-01
(LCD w/ brackets & cabling)
EC9850-04
(touchscreen only)
MW0733-01
(coin entry face bracket)
SB0377-01
(domestic mechanical coin mech)
HW8317-XX
(international/Canadian electronic coin mech)
HW8333-XX
(electronic coin mech--wet deck)
MP0049-01
(coin entry faceplate)
MP0086-01
(coin mech enclosure)
MW0735-01
(coin lever)
SA0470-03
(fan)
MW0939-01
(coin mech bracket)
HW4509-01
(screw)
*not shown
GL0041-02 (Elite Edge base decal)
MP0085-01 (front plate)
LB0004-01 (blue light)
MW0945-01 (domestic bill acceptor bracket)
MW0945-02 (Smiley bill acceptor bracket)
MW0945-03 (bill acceptor block out plate for coin only games)
GL0038-01
(clear marquee)
PM8950-16
(FORCE 2006 sign)
MW0942-02
(large coin box - coin
only games)
MW0942-03
(small coin box - coin
and bill games)
HW8314-01
(spring)
MW0981-01
(coin box support)
MW0967-01
(hinge bracket)
MP0086-01
(coin entry pod)
SW4025-02
(power entry
module)
MW0970-01
(enclosure)
MW0940-01
(coin chute)
MP0082-01
(coin cup)
HW8207
(screw)
MW0930-01
(base)
*not shown
MW0944-01 (rear door)
HW8733-03 (lock)
MW0510-01 (lock cam)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Megatouch FORCE Upright Fusion
Dimensions: D - 21”; W - 20”; H - 67”
Shipping weight: 200 lbs.
Motherboard Information
ECS
Touchscreen Type
Microtouch
Cabinet Information - General Information - Megatouch FORCE Upright Fusion
Megatouch FORCE Technical Reference Manual
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE Upright Fusion
Megatouch FORCE Technical Reference Manual
MEGATOUCH FORCE FUSION WITH ELECTRONICS BOX
SA10066-01
(OSD board)
EC9840-08
(touchscreen controller)
HW8425-05
(gas strut)
HW8442-01
(bracket--top and bottom)
HW8423-01
(safety clip--top and bottom)
HW4487
(screws--2 top, 2 bottom)
EC9796-06
(bill acceptor)
MW0889-01
(cash door)
HW8716
(speaker panel lock)
GL0036-01*
(left panel decal)
GL0036-02*
(right panel decal)
*not shown
GL0035-01*
(front decal)
*not shown
SA4084
(speaker assembly)
MW0890-01
(speaker panel)
HW8728-02
(cash door lock)
MW0896-01
(lock cam)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE Upright Fusion
Megatouch FORCE Technical Reference Manual
MEGATOUCH FORCE FUSION WITH ELECTRONICS BOX
SA0309-04
(counter assembly)
EC2001
(power cord)
EC7536-01
(power supply)
EC2198-01
(centronics ribbon cable)
SA10057-07
(motherboard)
SA10065-01
(I/O board)
EC0056-01
(DIMM)
EC9401-09
(CPU fan)
SA0470-01
(fan)
MW0902-01
(electronics box cover)
PA3024-01
(hard drive)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Cabinet Information - General Information - Megatouch FORCE Upright Fusion
Megatouch FORCE Technical Reference Manual
MEGATOUCH FORCE FUSION WITH ELECTRONICS BOX
HW8249
(mechanical coin rejector)
(monitor bezel)
HW8403-01
(rear handle)
WD0054-01
(cabinet)
MP0054-02
GL0034-08
(line filter w/ switch)
comes w/ cam lock)
(Ethernet coupler)
HW8716
(rear door lock--
CN4451-01
(phone coupler)
CN4452-01
(bezel hinge)
EC9340-03
(circuit breaker)
EC3040
MW0805-01
(clear marquee holder--back)
(clear marquee holder--front)
(touchscreen)
GL0037-02
GL0037-01
EC9851-02
SA0469-09
(LCD & touchscreen)
SA0469-09
(LCD)
(FORCE 2006 marquee)
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
MEGATOUCH FORCE FUSION WITHOUT ELECTRONICS BOX
Cabinet Information - General Information - Megatouch FORCE Upright Fusion
Megatouch FORCE Technical Reference Manual
SA0177-05
(lamp assembly)
LB1030-01
(bulb)
EC9796-06
(bill acceptor)
MW0709-01
(bill acceptor mounting plate
MW0710-01
(bill acceptor shroud)
HW8731
(currency door lock)
MW0095-03
(stay arm)
MW0701
(stay arm upper bracket)
MW0098-01
(stay arm hat bracket)
GL0036-01*
(left panel decal)
GL0036-02*
(right panel decal)
*not shown
WD0047-01
(cabinet)
GL0035-01*
(front decal)
*not shown
SA10065-01
(I/O board)
EC2001*
(USA power cord)
*not shown
EC7531-03
(power supply)
HW8721
(lock)
MW0792-01
bezel lock mech)
EC9840-08
(touchscreen controller)
EC2198-01
(centronics ribbon cable)
PA3024-01
(hard drive)
SA10066-01
(OSD board)
MW0758-01
(bill acceptor cover)
MW0755-01*
(bill acceptor cover plate)
MW0756-01*
(bill acceptor cover plate backing
*not shown
MW0708-01
(currency door)
MW0700-01*
(coin box)
HW8401-02*
(pull handle)
*not shown
SA10057-01
(motherboard)
EC0056-03
(DIMM)
EC9401-09
(CPU fan)
HW8159-XX
(mechanical coin mech)
SA0473-01
(mechanical coin mech harness)
HW8317-XX
(electronic coin mech)
EC0104-02
(mechanical coin mech harness)