manuals/manuals_Support_Center_manuals_PM0680_01

Table of Contents

Megatouch Entertainer, Ion 2008.5, MegaNet, Megatouch, TournaMAXX

and

TournaCHAMP

are registered trademarks of

Merit Entertainment.

Reproduction of this manual, in any form or by any means, is strictly forbidden without the written permission of Merit
Entertainment.

I/O Board & Memory Installation Instructions .......................... p. 1-2

Software Installation Instructions ............................................. p. 3-4

AMI Music Setup ......................................................................... p. 5-

Software License
Agreements................................................................................. p.

10-15

English ...................................................................................... p.

French ....................................................................................... p. 1

-1

German ...................................................................................... p. 1

-1

NOTE:

In order to use the Premium Sound System Kit with games that have

been converted to Entertainers using this kit, the serial number of your game
must be 012808XXXXXXXX or higher. (The first 6 digits of the serial number
represent the manufacture date.)

Megatouch Entertainer Conversion Kit

1 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

CONTENTS:

Turn off and unplug the game.

Unlock and open the CPU section.

Remove the 3 screws securing the I/O
board to the I/O mounting bracket (see
Figure 1). Remove all connections from
the I/O board, taking note of their posi-
tions so you can reconnect them to the
new board.

Use Figure 1 to locate the DIMM sock-
ets on the motherboard. Take note of
which socket the memory is using and
then simultaneously press down on the
two tabs on either side of the strip to
release it from the socket. Remove the
DIMM strip from the board and place it
in an anti-static bag for storage.

Line up the notches on the replace-
ment DIMM strip with the notches on
the DIMM socket (the same socket
where the original DIMM strip was lo-
cated). Making sure that the notches
are lined up will ensure that the strip is
facing the correct way. Then, care-
fully, but firmly and evenly, press down

on the memory to insert it into the
socket. The tabs on either side of the
socket will latch onto the edges of the
DIMM when it is correctly installed.

Check the jumpers on the provided I/O
board. If your game has an Imonex
coin mech, the jumper must be removed
from JP7 on the I/O board. For all other
games, the jumper should remain at JP7.
Refer to Figure 2 for location.

Install the provided I/O board in the same
orientation and secure it with the same
3 screws (see Figure 1).

Using Figure 2 for reference, restore
all of the connections to the I/O board.

Remove the existing security key from
the OSD board and replace it with the
provided key (labeled SA3555-01). See
Figure 1.

10. If there is a security key on the I/O board

(see Figure 1), remove it. This key will
not be replaced.

11. Continue with

Software Installation

Instructions

I/O Board, Memory and Security Key Installation Instructions

If you are installing the kit which does not include an I/O board or memory skip to
step 9 below.

IMPORTANT

: You

MUST

remove the original memory in your game and replace it

with the memory provided in this kit. Simply adding the additional memory can
cause incompatibility issues.

QTY PART

NUMBER

DESCRIPTION

1 SA3555-01

SECURITY

KEY

PA0090-11

ION 2008.5 DISC 1

PA0090-12

ION 2008.5 DISC 2

PARTS IN KUV-117-003-01-XX ONLY

1 SA10068-09

I/O

BOARD

EC0146-04

256 MB MEMORY

FIGURE 1 - ION EVO WALLETTE CPU SECTION OPENED

FIGURE 2 - I/O BOARD

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 2

I/O

BOARD

CPU SECTION

LOCK

SECURITY

KEY SOCKET

ON OSD BOARD

DIMM

SOCKETS ON

MOTHERBOARD

SECURITY KEY
SOCKET ON
I/O BOARD

DETAIL VIEW

OF I/O BOARD

SCREWS
SECURING
I/O BOARD
TO MOUNTING
BRACKET

STANDOFF SECURING
COVER PLATE ON
BACK OF CPU SECTION

J12

SPEAKER

SMILEY BILL

ACCEPTOR

MECHANICAL

MECH

METER 1

J19
METER 2

J1 ELECTRONIC MECH

J31
KEY SOCKET
CONNECTOR

CALIBRATE

POWER

SETUP

J5 - CONNECTS
TO USB2 ON
MOTHERBOARD

J16 MODEM AUDIO

J11

REMOTE
CALIBRATE/SET UP/KEY
ON OSD BOARD

BILL

ACCEPTOR

JUMPER AT JP7

J27

MODEM CABLE

J14 WATCHDOG TIMER

J15

AUDIO

Connecting a DVD Drive

Turn off power to the game.

Connect the 2 x 20-pin connector on
the centronics cable (see Figure 3) to
the IDE interface connector on the back
of the DVD drive. Make sure the red
stripe on the ribbon cable matches up
with pin 1 on the IDE connector (see
Figure 4).

Connect the four 4-pin power connec-
tor on the ribbon cable (see Figure 3)
to the DC power input on the drive (see
Figure 4).

Remove the cover plate at the back of
the CPU section by removing the stand-
off inside the CPU section (see Figure
1). Locate the centronics connector
on the back of the CPU section.

Make sure your drive is configured as
the Master Drive. See Figure 4 for typi-
cal master/slave jumper location.

Connect the centronics connector on
the ribbon cable to the centronics con-
nector on the game.

NOTE:

When positioning your drive, it is

important that you find a suitable place
where the drive will not be in danger of com-
ing in contact with any components or wires
inside of the game.

*This installation requires a DVD drive which is not included.

It is recommended that you use

a DVD drive of at least 12X or better that is capable of operating on an angled surface, as
you may not always have a level surface on which to place it.

You must configure your DVD drive as the

Master Drive

Software Installation Instructions

FIGURE 3 - CENTRONICS RIBBON CABLE

FIGURE 4 - REAR VIEW OF DVD DRIVE

3 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

NOTE:

You must be running V24.20 software or above in order for the Entertainer

to function. If you are not running this software version, follow the instructions
below to install the provided software.

DVD POWER (DC INPUT)

CONNECTOR

PIN 1

CENTRONICS
CONNECTOR
(TO GAME)

IDE CONNECTOR

(TO DVD DRIVE)

MASTER/SLAVE

JUMPERS

PIN 1

IDE INTERFACE

CONNECTOR

DC (POWER)
INPUT

Software Installation

Performing a full upgrade will delete previ-
ous information and files on your hard drive.
If you want to retain any pertinent informa-
tion (e.g. Books Screen information), you
will need to document that information be-
fore performing the upgrade.

If you are connected to TournaMAXX™
or TournaCHAMP™, you must perform
an

Update From Server

before be-

ginning this installation so that informa-
tion is not deleted.

Turn on the game.

Insert the disc into the drive. If you
don't get the disc into the drive before
the game starts to boot-up, turn off the
game and turn it back on.

10. The message: "

By continuing with

this installation program, you in-
dicate that you accept the terms
of Merit's software license agree-
ment

" will appear on the screen. The

software license agreement can be
found in the back of this manual. If you
accept the terms, select "

Yes, I agree

NOTE:

If you do not agree to the terms of

the agreement, reboot the game in order to
remove the disc, then turn the game off and
disconnect the drive. The game will con-
tinue running the current software.

11. When the first disc is finished install-

ing, the message: "

Please replace

the current disc with disc #2 then
close the door to continue

" will ap-

pear on the screen. Remove the first
disc, insert the disc labeled

Disc 2

and

close the door.

12. When the disc is finished installing, the

screen will display a message indicat-
ing that the update is complete.

13. Remove the disc and turn off power to

the game.

14. Carefully disconnect the ribbon cable

from the centronics connector on the
game.

NOTE:

When disconnecting the ribbon

cable, carefully disconnect the cable by
grasping the connector and not the cable
itself.

15. Close and lock the CPU section and then

restore power to the game. When
prompted, perform a touchscreen cali-
bration.

16. If you are connected to TournaMAXX™

or TournaCHAMP™, you will have to
re-enter the dial-in settings and then
perform an

Update From Server

Refer to the MegaNet® manual for in-
structions.

17. Continue with

AMI Music Setup

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 4

5 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

AMI Music Setup

In order to set up your Entertainer to play
music, follow the instructions below.

In order to continue with music setup, your
Operator Agreement must be filled out and
received by Merit.

To enable this feature, you will need a
broadband Internet connection, a router
(The Linksys 802.11B router is recom-
mended) and Ethernet cable(s) (if you aren’t
using wireless). It is recommended that
you set up and configure your router prior
to connecting the unit. Once the router is
set up, follow the instructions below.

Hardware:

Wired Connections:

Turn off and

unplug the unit and connect an Ethernet
cable to the Ethernet coupler inside
the cash door. Connect the other end
of the cable to the external router. Plug
in and turn on the unit.

If you are linking the unit to an AMI
jukebox, turn off the jukebox and con-
nect an additional Ethernet cable from
the jukebox’s interior router to the ex-
ternal router.

Wireless Connections:

Plug in and

turn on the unit.

NOTE: When you first turn on an En-
tertainer unit, it will display a mes-
sage indicating it is out of service.
Your game must call into the server in
order for it to function.

Software:

Press the SETUP button.

Touch the

System

button, and then

touch

AMI Setup

, followed by

Op-

tions

NOTE:

A pop up box may appear informing

you that a broadband Internet connection
is required. If it does, press

Okay

Make sure that the box next to

Func-

tion as Entertainer

is checked.

Touch the

MAIN MENU

button to re-

turn to the Main Menu.

At the MAIN MENU, touch the

TournaMAXX

button (see Figure 5).

The Set Game Serial No. Screen will
appear. At this screen, enter the game’s
serial number (found on the outside of
the game) and touch

ENTER

. The game

will then prompt you to enter the time
zone. The times are listed using Green-
wich Mean Time. Scroll through the list
to find your time zone and select it by
touching it.

FIGURE 5 - MAIN MENU SCREEN

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 6

FIGURE 7 - ETHERNET INTERNET SETUP

SCREEN

Wired Connections Only:

Next to

(LAN) Local Area Network Con-
nection

(see Figure 6), touch

Ethernet

to advance to the Ethernet

Internet Setup Screen (see Figure 7).
At the next screen, depending on how
you are connecting to the server, se-
lect either

Automatic

and continue with

step 10, or

Manual

and continue with

step 11.

Touch the

button to return to the Main

Menu and then touch the

Network

button on the Main Menu.

Next to

Internet Connection

, select

the

LAN

option (see Figure 6). For

wired connections, continue with step
9, for wireless, continue with step 12.

FIGURE 6 - NETWORK MENU SCREEN

10. Automatic Connections Only: After se-

lecting

Automatic

, press the

Setup

button. The game will prompt you to
confirm the default Server Name, Pri-
mary DNS and Secondary DNS infor-
mation. Touch the

NEXT

button to ac-

cept these defaults. Then, touch the

YES

button for the game to connect to

the server and complete the registra-
tion process. Confirm that the location
information is correct, then press

YES

Continue with step 12.

11. Manual Connections Only: After select-

ing

Manual

, press the

Setup

button.

The game will then prompt you to enter
the Static IP Address. Enter the Ad-
dress given to you by your service pro-
vider and touch the

NEXT

button. Then,

enter the Gateway given to you by your
service provider and touch the

NEXT

button. The Server Name, Primary DNS
Address and Secondary DNS Address
will already be filled out, simply touch

NEXT

to accept the default information.

Then, touch the

YES

button for the game

to connect to the server and complete
the registration process. After the
game calls in, confirm that the location
information is correct, and press

YES

Continue with step 14.

Ion server connections:

Automatic:

This setting is for cable or

DSL connections using dynamic IP
addresses. Contact your Internet service
provider if you are unsure of what kind of
IP address they use.

Manual:

This setting is for cable or DSL

connections using static IP addresses.
Contact your Internet service provider if
you are unsure of what kind of IP
address they use.

7 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

12.

Wireless connections Only:

Touch

the

Wireless

button next to

(LAN)

Local Area Connection

to advance

to the Internet Setup Screen. Touch

Configure Device

and choose from

the following options (see Figure 8):

NOTE: If you are using security, only
64 or 128-bit WEP encryption is sup-
ported.

Autodetect Network

: The system will find

and connect to the nearest available wire-
less network. This is the easiest way to
connect.

Search for Networks

: Looks for all avail-

able wireless connections. Select a con-
nection from the list to proceed.

-Secured connection

Choosing a

“locked” device will prompt a key (pass-
word) request. If it is your own net-
work, use your password to gain ac-
cess. If not, this indicates an outside
network that has been encrypted and
is not accessible.

-Unsecured connection

You will be

prompted to enter interface information.
Accept the default values, or consult a
network advisor to manually configure
these settings.

FIGURE 8 - WIRELESS DEVICE SETUP

OPTIONS

Ad-Hoc Network

: This is only for linking

games, not for connecting to the AMI server.

Custom Configuration

: Touching this but-

ton will prompt the user to enter the SSID
(network name) for manual setup of the
wireless connection.

NOTE: Wireless Internet connection
does not require Manual Configura-
tion. Only users who have changed the
default SSID during router installation
should change the SSID. Consult the
instructions supplied with your wire-
less router for more information.

NOTE:

If you have chosen

Custom Con-

figuration

, you will be prompted to enter

interface information. We suggest you ac-
cept the default values. If you want to manu-
ally configure these settings, consult a net-
work advisor.

13.

Wireless Connections Only:

Once

you have chosen your network con-
nection, touch the

button and then

press

Setup

from the Wireless Internet

Setup Screen. Touch

Yes

to confirm

that you want to continue. Then, ac-
cept the default values for the server
name and DNS addresses by touching

Next

3 times. Touch the

YES

button for

the game to connect to the server and
complete the registration process. Af-
ter the game calls in, confirm that the
location information is correct, then
press

YES

. Continue with step 14.

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 8

FIGURE 10 - AMI SETUP SCREEN

14. To confirm that a proper connection took

place, touch the

MAIN MENU

button,

and then touch

TournaMAXX

. Touch

Connection Log

. If there were no

errors, you will see “

SUCCESSFUL

” in

the Connection Log (see Figure 9). If
there is an error message, check the
troubleshooting guide and follow the
corrective action to fix the problem.

IMPORTANT:

If you are using the Enter-

tainer to play music, your game must make
a successful connection to the server in
order to function. If you attempt to call in,
but the call was not successful, the game
will function for a three-day grace period,
but if a successful call is not made within
those 3 days, it will shut down.

15. Touch the

button on the Connection

Log Screen and then touch

Set Up-

date Time

. Select a time when the

game is not busy for it to call into the
server. Then, touch the

button and

touch the

Update From Server

but-

ton to download additional information.
When this is complete, the game will
reboot and ask you to calibrate. Fol-
low the on-screen instructions.

16. Press the

Setup

button again, then

touch the

System

button, followed

AMI Setup

. See Figure 10.

NOTE: If the

AMI Setup

button does not

appear, touch the

Options

button and go

to page 4 in Options. Touch the box next
to

Enable AMI

. Then touch the

button

and touch

AMI Setup

FIGURE 9 - CONNECTION LOG SCREEN

17. If you want to assign a different name

for the unit, touch

Set

next to Enter-

tainer Name and assign a name for
your records. Otherwise, touch

Con-

nect

next to “Connection Status”. The

game will prompt you to enter the trig-
ger code. Enter and confirm the trig-
ger code that was provided with your
security key.

NOTE: If a jukebox is not detected, you
will be prompted to manually config-
ure the jukebox information obtained
from your jukebox setup screen. On
your jukebox, go into “Service”, then
select the “Diagnostics” and “System
Information” options on screen. En-
ter the MAC Address, exactly as it ap-
pears on the jukebox, into the Juke-
box ID field on your Megatouch. (The
defaulted Server URL and Agent Name
are also listed.) Once the information
is entered, touch “Connect” again on
the AMI Setup screen to proceed.

9 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

18. The game will download the files. Un-

der normal circumstances this could
take 30 to 45 minutes. Merit has a
music catalog download which will de-
crease this time. To download the cata-
log, go to http://www.meritgames.com/
amidatabase.asp. A

“Connection

Successful”

message will appear

when finished, followed by an option
to enable the link. Touch

YES

to com-

plete the process. Once the link is
established, you may return to the AMI
Setup screen to disable, test or view
connection details.

19. You can now log in, using your AMI

user name and password,
to your Operator Web Site
(www.amientertainment.net) and se-
lect the albums you want to be down-
loaded to the Entertainer.

20. Touch

MAIN MENU

at the top of the

screen, then touch

Credits/Pricing

21. Touch

AMI Play Cost

to configure the

price of music selected from the game.
Use the arrows to set the two-digit
credit cost (e.g. “02” = 2 credits) for
each of the play options: One Song
Play, MOD (Music On Demand), and
Priority Play (“My Song First” - if avail-
able).

NOTE: The cost of one song must be
set to a minimum amount of 33¢. If
your game is set to one credit is equal
to 17¢, each field in the AMI Play Cost
Screen must be at least 2 credits in or-
der to enable music on the game.

22. Touch the

in the upper right corner

of the screen and confirm that you
want to exit the setup screens by
pressing

YES

Viewing Music Revenue

To view music revenue, use the following
procedure:

Press the SETUP button.

Touch

Books.

Touch

Cash Settlement Collection.

Touch

Revenue Details/Cash Out.

Locate

Entertainer Music

Juke-

box Selector Music

revenue.

Merit Industries, Inc. Software License Agreement

Merit Industries, Inc. (“Licensor”) is willing to license the enclosed software to you only if
you accept all of the terms in this license agreement (“Agreement”).

Ownership of the Software
1.

The enclosed Merit® product, which may include but is not limited to the Megatouch®
software program (“Software”) and the accompanying written materials are owned
by Licensor and are protected by United States copyright laws, patent laws and
other intellectual property laws, by laws of other nations, and by international treaties.

Restrictions on Use and Transfer
2.

If this Software package contains multiple media types (such as CD’s, flash cards,
hard drives, etc), then you may use only the type of media appropriate for your
Machine. You may not use the other media types on another Machine, or transfer, or
assign them to another user except as part of the permanent transfer of the Software
and all written materials (as provided for below in paragraph 4).

You may make one copy of the software for backup purposes only. You may not
copy or make backup copies of any software security key or software security
device under any circumstances.

You may permanently transfer the right to use the Software and accompanying
written materials (including the most recent update and all prior versions) if you retain
no copies and the transferee agrees in writing to be bound by the terms of this
Agreement. Such a transfer of this license to another party immediately terminates
your license. You may not otherwise transfer or assign the right to use the Software,
except as stated in this paragraph.

You may not operate or allow the operation of the Software at locations where the
operation of such Software does not comply with all local, state, and other
governmental body laws and regulations. You agree to not use or permit the use of
the Software in violation of any U.S. Federal, state, or local laws or regulations or
any foreign law or regulation, including laws regarding gaming, gambling or intellectual
property rights in or concerning the Software.

You may not modify, adapt, translate, reverse engineer, decompile, disassemble the
Software or create derivative works from the Software or any component thereof;
nor may you remove, modify or hide or otherwise make unreadable or non-viewable
any notice, legend, advice, watermark or other designation contained on the Software,
component thereof, or output therefrom.

You agree that the Software and the authorship, systems, ideas, inventions methods
of operation, documentation and other information contained therein, and all versions,
modifications and adaptations thereto are proprietary intellectual properties of Licensor
and are protected by civil and criminal law, and by copyright, trade secret, trademark
and the patent laws of the United States and other countries.

Limited Warranty
8.

Licensor warrants, solely for your benefit, that the Software will function in material
conformity, with its accompanying documentation for a period outlined in Licensor’s
standard product warranty period after your receipt of the Software.

Licensor’s Obligations Under Warranty
9.

Licensor’s sole obligation under the aforesaid warranty shall be to utilize commercially
reasonable efforts to correct or modify such portion of the Software as to make it
materially conform with the applicable documentation.

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 10

Grant Of License
10. Licensor grants to you a limited, non-exclusive license to distribute and/or use one

copy of the Software on a single Merit (“Machine”) accompanied by a single licensor
factory authorized security key. Licensor reserves the right to update versions of the
software and the content to the Machine as deemed appropriate by the Licensor.
You are entrusted to maintain and protect your single licensor factory authorized
security key, password, or other identification from being utilized by any third party,
and you agree to be responsible for any use of the Software provided herein by a
third party utilizing your identification. Licensor maintains the right to immediately
terminate your License for reasons related to misuse or other non-conformity with
the rules expressed herein. While Licensor does not routinely inspect Machines,
Licensor also reserves the right to inspect or audit the Software from time to time in
Licensor’s sole discretion. To the extent that Licensor’s access to the Software
requires that Licensor also gain access to a Machine in which the Software is
installed, you agree to promptly provide Licensor, when requested, with permission
and aid in Licensor gaining access to the Machine.

Disclaimers
11. EXCEPT AS PROVIDED IN THE SECTION ENTITLED “LIMITED WARRANTY”, LICENSOR

MAKES NO OTHER PROMISES, REPRESENTATIONS OR WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, REGARDING OR RELATING TO THE SOFTWARE OR
CONTENT THEREIN OR TO ANY OTHER MATERIAL FURNISHED OR PROVIDED TO
YOU PURSUANT TO THIS AGREEMENT OR OTHERWISE AND LICENSOR SPECIFICALLY
DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO SAID MATERIALS OR THE USE THEREOF.
TO THE MAXIMUM EXTENT ALLOWABLE BY LAW THE UNIFORM COMMERCIAL CODE
OR OTHER UNIFORM LAWS SHALL NOT APPLY TO THIS AGREEMENT.

Limitation on Liability
12. IN NO EVENT SHALL LICENSOR BE LIABLE UNDER ANY CLAIM, DEMAND OR ACTION

ARISING OUT OF OR RELATING TO THE SOFTWARE, ITS USE, INSTALLATION OR
LICENSOR’S PERFORMANCE OR LACK THEREOF UNDER THIS AGREEMENT FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
CLAIM, DEMAND OR ACTION. IN ADDITION, WITHOUT LIMITING THE FOREGOING, IN
ALL EVENTS THE REMEDIES AVAILABLE TO YOU SHALL BE LIMITED TO THE AMOUNT
PAID BY YOU TO LICENSOR FOR THE SOFTWARE.

13. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

LOSS OF PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF YOUR USE, MISUSE, BREACH OF THIS AGREEMENT OR
INABILITY TO USE THE SOFTWARE.

General
14. The validity and construction of this Agreement and of the rights and obligations herein

shall be determined and governed by the laws of the State of New York. By accepting
the terms of this Agreement, you acknowledge and accept that the courts of New
York, New York shall have exclusive jurisdiction and venue regarding any disputes
arising with regard to this Agreement or arising out of activity or misuse of the
Software.

15. Merit, in its sole discretion, may assign this agreement or any of its rights and

obligations hereunder.

16. If you have any questions concerning this Agreement or wish to contact Licensor for

any reason, please write: Merit Industries, Inc., 155 Rittenhouse Circle, Bristol, PA
19007, USA.

11 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

Contrat de licence de logiciel de Merit Industries, Inc.

Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence d'utilisation
du logiciel ci-inclus, à condition que vous vous engagiez à respecter tous les termes, clauses et
conditions du présent contrat de licence (Contrat).

Droit de Propriété
1.

Le produit Merit ci-joint contenant, mais ne s'y limitant pas, le logiciel Megatouch™ (ci-après le
"logiciel") et toute la documentation écrite, restent la propriété du Concédant et sont protégés
par : les lois de droits d'auteur des Etats-Unis, les lois s'appliquant aux brevets déposés et à
la propriété intellectuelle, ainsi que par celles des autres pays et les traités internationaux.

Restriction d'Utilisation et Transfert
2.

Si le présent logiciel comprend plusieurs types de composants (tels que CD-ROM, cartes
flash, disques durs, etc), vous ne pouvez utilisez que ceux qui conviennent à votre appareil.
Il est strictement interdit de les utiliser sur un autre appareil, les transférer -ou les céder à un
autre utilisateur, sauf en cas de transfert permanent du logiciel et de toute la documentation
écrite (comme indiqué ci-dessous au paragraphe 4).

Il est interdit de copier le logiciel, à l'exception d'une copie de sauvegarde. Il est aussi interdit
de reproduire -ou faire des copies de sauvegarde des programmes de clé de sécurité ou
autres fichiers de sécurité, quelles que soient les circonstances.

Vous pouvez céder en permanence à un tiers -le droit d'utiliser le LOGICIEL et toute la
documentation écrite l'accompagnant, (ainsi que la plus récente mise à jour et toutes autres
anciennes versions) seulement si vous n'en gardez aucune copie, et si le cessionnaire
s'engage, par écrit, à respecter les termes, clauses et conditions du présent Contrat. Cette
cession à un tiers met fin à votre licence immédiatement. Autrement, vous n'avez pas la
permission de transférer ou d'accorder à un tiers le droit d'utiliser le présent logiciel, excepté
que tel que décrit dans le présent paragraphe.

Il est interdit d'utiliser le présent logiciel ou de permettre son utilisation dans des emplacements
où l'utilisation du présent logiciel n'est pas conforme aux lois et réglementations locales,
nationales ou réglementations d'autres organismes gouvernementaux. Vous acceptez de ne
pas utiliser ou d'autoriser l'utilisation du logiciel d'une manière enfreignant les lois ou regula-
tions s'appliquant à la propriété intellectuelle et au jeu, en vigueur aux Etats-Unis ou dans les
autres pays du monde, y compris les lois de l'ensemble du logiciel.

Il est interdit de modifier, adapter, traduire, démonter, décompiler, désassembler le logiciel ou
créer du matériel dérivé du logiciel ou de tout composant de celui-ci ; vous ne pouvez pas
enlever, modifier ou cacher ou rendre illisible ou non-visible toute instruction, légende, infor-
mation ou filigrane ou autre désignation qui apparaît dans le logiciel, composant dudit logiciel
ou résultant dudit logiciel.

Vous convenez que le logiciel et les droits d'auteur, les systèmes, les idées, les inventions, les
méthodes d'utilisation, la documentation et autre information incluse, ainsi que toutes les
versions, modifications et adaptations qui s'y rattachent sont les propriétés intellectuelles du
Concédant et sont protégées par le droit civil et pénal et par le droit d'auteur, le secret
commercial, la marque déposée et le brevet aux Etats-Unis et dans les autres pays du monde.

Limite de Garantie
8.

Le Concédant garantit seulement à votre intention, que le logiciel permettra une utilisation
conforme, avec la documentation l'accompagnant, pendant la période de temps indiquée
dans la période de garantie du produit standard du Concédant, à compter de la date de
livraison du logiciel.

Responsabilité du Concédant aux termes de la Garantie
9.

La seule obligation du Concédant aux termes de la garantie susmentionnée sera de faire tous
les efforts commercialement raisonnables pour corriger ou modifier la partie du logiciel pour
le rendre matériellement conforme aux spécifications de la documentation.

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 12

Concession de Licence
10. Le Concédant vous accorde le droit d'utiliser une seule copie par appareil Merit (ci-après

"Appareil") accompagné d'une seule clé de sécurité autorisée en usine et fournie par le
Concédant. Le Concédant se réserve le droit de mise à jour des versions du logiciel et du
contenu de l'Appareil, quand il juge nécessaire de le faire. Il vous appartient également
d'empêcher que les mots de passe ou autres codes et la clé de sécurité soient utilisés par un
tiers. Vous acceptez d'assumer la responsabilité dans le cas de l'utilisation du logiciel par un
tiers. Le Concédant se réserve le droit de résilier votre contrat de licence à tout moment dans
l'éventualité d'une utilisation non-conforme aux clauses stipulées. Bien que le Concédant ne
contrôle pas les appareils périodiquement, il se réserve toutefois le droit de contrôler le logiciel
à tout moment et sans préavis de sa part. De surcroît, dans l'éventualité où le logiciel n'est
accessible qu'à travers la machine dans laquelle il est installé, le licencié s'engage à donner
libre accès au Concédant, ou ses représentants, à la machine et dans les plus brefs délais.

Exclusion de toute autre garantie
11. EXCEPTE COMME PREVU DANS LA SECTION INTITULEE "LIMITE DE GARANTIE", LE CONCEDANT

N'ASSURE AUCUNE AUTRE GARANTIE DE QUELQUE NATURE ET A QUELQUE TITRE QUE CE
SOIT, EXPLICITE OU IMPLICITE, EN RAPPORT AVEC LE LOGICIEL ET LES COMPOSANTS QUI
L'ACCOMPAGNENT OU, LE CAS ECHEANT, TOUT SUPPORT OU MATERIEL FOURNI
CONFORMEMENT AU PRESENT CONTRATEN PARTICULIER, LE CONCEDANT NE PEUT
DONNER AUCUNE GARANTIE, DE QUELQUE NATURE QUE CE SOIT, POUR LA
COMMERCIALISATION DE TOUS LES PRODUITS EN RAPPORT AVEC LE LOGICIEL OU AVEC
L'UTILISATION DE CELUI-CI. DANS LA MESURE OU CELA EST PERMIS PAR LA LOI, LE CODE
UNIFORME COMMERCIAL OU AUTRE LOI UNIFORME NE S'APPLIQUE PAS AU PRESENT
CONTRAT.

Limite de Responsabilité
12. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DE TOUTE RECLAMATION,

DEMANDE OU ACTION RESULTANT DE OU EN RAPPORT AVEC LE LOGICIEL, SON UTILISATION
OU SON INSTALLATION, OU LA PERFORMANCE OU MANQUE DE PERFORMANCE DU
CONCEDANT EN VERTU DU PRESENT CONTRAT POUR TOUS DOMMAGES D'UNE NATURE
QUI N'EST PAS PRESUMEE PAR LA LOI ET QUI DOIVENT ETRE EXPRESSEMENT PROUVES,
DOMMAGE INDIRECTS, DOMMAGES-INTERETS POUR PREJUDICE MORAL, QUE LE
CONCEDANT AIT ETE AVISE OU NON DE LA POSSIBILITE D'UNE TELLE RECLAMATION,
DEMANDE OU ACTION. DE PLUS, SANS LIMITER CE QUI PRECEDE, LES DEDOMMAGEMENTS
A VOTRE DISPOSITION SERONT LIMITES AU MONTANT QUE VOUS AUREZ PAYE AU
CONCEDANT POUR LE LOGICIEL.

13. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSIBLE : D'UNE RUPTURE DE CONTRAT,

DES DOMMAGES, Y COMPRIS TOUTE PERTE DE PROFIT, PERTES D'ECONOMIE OU TOUS
AUTRES DOMMAGES INDIRECTS OU DOMMAGES-INTERETS ACCESSOIRES DECOULANT
DE LA MAUVAISE UTILISATION OU DE L'IMPOSSIBILITE D'UTILISATION DU LOGICIEL.

Dispositions Générales
14. La validité et la construction du présent Contrat et les droits et obligations ci-inclus seront

déterminés et régis par les lois de l'état de New York aux États-Unis. En acceptant les
dispositions du présent contrat, vous acceptez également que tous litiges ou revendications
relatives seront réglés par voie d'arbitrage par un tribunal de l'état de New York, aux Etats-
Unis.

15. Merit Industries se réserve le droit de transférer le présent Contrat à un tiers ainsi que ses

droits et obligations ci-après.

16. Pour toutes questions concernant le présent Contrat -ou si vous désirez contacter le Concédant

pour une raison quelconque, veuillez écrire à : Merit Industries, Inc., 155 Rittenhouse Circle,
Bristol, PA 19007, Etats-Unis.

13 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01

Merit Industries, Inc. Softwarelizenzabkommen

Merit Industries, Inc. („Lizenzgeber”) ist nur dann bereit Ihnen eine Lizenz für die beiliegende
Software zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens (“Abkommen”)
akzeptieren.
Eigentumsvorbehalt der Software
1.

Das beiliegende Merit®-Produkt, welches das Megatouch® Softwareprogramm („Soft-
ware”) beinhalten kann, aber nicht darauf beschränkt ist, und die schriftlichen Unterlagen
sind Eigentum des Lizenzgebers und sind durch die Gesetze der Vereinigten Staaten
und anderer Länder und durch internationale Verträge urheberrechtlich geschützt.

Beschränkungen im Gebrauch und Transfer
2.

Sollte diese Softwarelieferung mehrere Medien enthalten (z.B. CD, Karten, Festplatten
usw.), dürfen Sie nur die für Ihre Maschine angebrachte Medienart verwenden. Die anderen
Medienarten dürfen nicht auf anderen Maschinen verwendet werden oder an Dritte
übergeben werden, abgesehen von einem endgültigen Transfer der Software und aller
schriftlichen Unterlagen (wie im untenstehenden Paragraphen 4 beschrieben).

Sie dürfen nur eine Sicherungskopie der Software herstellen. Unter keinen Umständen
dürfen Sie einen Softwaresicherungsschlüssel oder Sicherungsmaßnahmen kopieren oder
davon Sicherungskopien herstellen.

Sie dürfen das Nutzungsrecht für die Software und die schriftlichen Unterlagen (einschließlich
der aktuellen Version und aller vorhergehenden Versionen) an Dritte übertragen, wenn Sie
keine Kopie behalten und wenn der Empfänger die Bestimmungen dieses Abkommens in
schriftlicher Form akzeptiert. Bei einem solchen Transfer der Lizenz an Dritte erlischt Ihre
Lizenz umgehend. Abgesehen von den Bestimmungen dieses Paragraphen sind alle anderen
Transfers oder Übertragungen der Nutzungsrechte für diese Software unerlaubt.

Sie dürfen die Software nicht benutzen oder eine Nutzung gestatten, wenn eine
solche Nutzung der Software irgendwelche Gesetze und Verordnungen der
kommunalen oder staatlichen Behörden verletzen würde. Sie verpflichten sich die
Software nicht so zu nutzen oder nutzen zu lassen, dass sie damit gegen staatliche,
Bundes- oder Lokalgesetze oder Bestimmungen der USA oder gegen ausländische
Gesetze oder Bestimmungen, einschliesslich aller Gesetze bezüglich Glücksspiels,
Spielens oder geistigen Eigentumrechts der Software, verstossen.

Es ist Ihnen nicht gestattet, die Software abzuändern, zu verändern, zu übersetzen,
rückumzuwandeln, zu dekompilieren oder zu zerlegen, oder aus der Software oder eines
Teils davon andere Werke abzuleiten. Sie dürfen auch aus der Software, einem Bestandteil
der Software oder aus den Datenausgaben der Software keine Hinweise, Bemerkungen,
Ratschläge, Wasserzeichen oder andere Markierungen entfernen, verändern, verbergen
oder auf andere Art unlesbar machen.

Sie akzeptieren, dass die Software und die Urheberschaft, die Systeme, die Ideen,
Erfindungen, die Arbeitsweisen, die Dokumentation und alle anderen darin enthaltenen
Informationen und alle Versionen, Veränderungen, und Bearbeitungen davon das geistige
Eigentum des Lizenzgebers sind, und dass sie durch Straf- und Zivilgesetzgebung und
durch die Copyright-, Geschäftsgeheimnis-, Warenzeichen- und die Patentgesetze der
Vereinigten Staaten und anderer Länder geschützt sind.

Beschränkte Garantie
8.

Der Lizenzgeber garantiert zu Ihren Gunsten, dass die Software für die angegebene
normale Garantiezeit des Lizenzgebers nach Ihrer Annahme der Software in erheblicher
Übereinstimmung mit der beiliegenden Dokumentation laufen wird.

Verpflichtung des Lizenzgebers im Rahmen der Garantie
9.

Die ausschließliche Pflicht des Lizenzgebers im Rahmen der vorstehenden Garantie besteht
darin, alle geschäftlich vertretbaren Schritte zu unternehmen, um Teile der Software zu
berichtigen oder abzuändern, bis sie mit der beiliegenden Dokumentation erheblich
übereinstimmen.

PM0680-01 MEGATOUCH ENTERTAINER CONVERSION KIT 14

Übertragung der Lizenz
10. Der Lizenzgeber gewährt Ihnen eine beschränkte, nicht-ausschliessbare Lizenz zur

Vertreibung und/oder Benutzung einer Kopie der Software auf einem einzelnen Merit™ („Gerät”)
mit einem einzelnen werksmäßig gestatteten Sicherungsschlüssel. Der Lizenzgeber behält
sich das Recht vor, nach eigenem Ermessen die Software und den Inhalt der Maschine zu
verbessern. Sie sind dafür verantwortlich ihren individuellen, vom Lizenzgeber werksmäßig
gestatteten Sicherheitsschlüssel, ihr Passwort oder anderweitigen Identifikationsmechanismus
instandzuhalten und abzusichern gegen die Nutzung durch eine dritte Partei, und sie akzeptieren
die Verantwortung für jegliche Nutzung der besagten Software durch eine dritte Partei mithilfe
ihresIdentifikationsmechanismus . Obwohl der Lizenzgeber nicht regelmässig Maschinen
inspiziert, behält sich der Lizenzgeber das Recht vor, ihre Lizenz umgehend zu kündigen aus
Gründen des Missbrauchs oder bei Nichtbefolgung der Bestimmungen in diesem Vertrag. Der
Lizenzgeber behält sich ebenfalls das Recht vor, die Software von Zeit zu Zeit nach eigenem
Ermessen zu inspizieren oder zu überprüfen. Im Falle, dass der Lizenzgeber Zugang zu dem
Gerät wünscht, in dem besagte Software installiert ist, erklären Sie sich bereit, dass sie dem
Lizenzgeber, wenn nötig, Erlaubnis und Hilfe beim Zugang zum Gerät verschaffen.

Beschränkungen
11. ABGESEHEN VON DEN BESTIMMUNGEN DES PARAGRAPHEN „BESCHRÄNKTE GARANTIE"

GIBT DER LIZENZGEBER KEINE SONSTIGEN VERSPRECHEN, VERPFLICHTUNGEN ODER
GARANTIEN, OB AUSDRÜCKLICH ODER STILLSCHWEIGEND, FÜR DIE SOFTWARE ODER
IHRE BESTANDTEILE ODER FÜR ALLE ANDEREN MATERIALIEN, DIE IHNEN IM RAHMEN DIESES
ABKOMMENS ZUR VERFÜGUNG GESTELLT ODER ÜBERLASSEN WERDEN, UND DER
LIZENZGEBER LEHNT AUSDRÜCKLICH ALLE ANSPRÜCHE AUF MARKTFÄHIGKEIT UND
EIGNUNG DER BESAGTEN MATERIALIEN FÜR DEN GEWÖHNLICHEN GEBRAUCH AB. SOWEIT
GESETZESMÄSSIG ZUGELASSEN, SOLLEN DIE HANDELSRECHTLICHE GESETZGEBUNG
AUS DEM UNIFORM COMMERCIAL CODE ODER ANDERE GESETZE AUF DIESES ABKOMMEN
NICHT ANWENDBAR SEIN.

Haftungsbeschränkung
12. DER LIZENZGEBER HAT KEINERLEI HAFTUNG BEI EINEM ANSPRUCH, EINER FORDERUNG

ODER EINER KLAGE, DIE AUF NUTZUNG DER SOFTWARE, DEREN INSTALLIERUNG, DER
LEISTUNG DES LIZENZGEBERS ODER DESSEN VERSAGEN IM RAHMEN DIESES ABKOMMENS
FÜR JEGLICHE FOLGE-, INDIREKTE, SONDER- ODER NEBENSCHÄDEN BERUHEN, SELBST
WENN DER LIZENZGEBER AUF DIE MÖGLICHKEIT EINES SOLCHEN ANSPRUCHES, EINER
FORDERUNG ODER EINER KLAGE HINGEWIESEN WURDE. WEITERHIN UND OHNE
BESCHRÄNKUNG DES LETZTEN SATZES, DÜRFEN IN ALLEN FÄLLEN DIE IHNEN ZUR
VERFÜGUNG STEHENDEN ABHILFEN DIE VON IHNEN FÜR DIE SOFTWARE AN DEN
LIZENZGEBER GEZAHLTE SUMME NICHT ÜBERSCHREITEN.

13. DER LIZENZGEBER HAT IN KEINEM FALL EINE HAFTUNG IHNEN GEGENÜBER FÜR SCHÄDEN,

EINSCHLIESSLICH ETWAIGER GEWINNVERLUSTE, NICHT REALISIERTER EINSPARUNGEN
ODER ANDERER NEBEN- ODER FOLGESCHÄDEN, DIE AUS IHRER VERWENDUNG,
MISSBRAUCH, VERLETZUNG DIESES ABKOMMENS ODER GEBRAUCHSUNFÄHIGKEIT DER
SOFTWARE ENTSTEHEN.

Allgemein
14. Die Rechtsgültigkeit und Provisionen dieses Abkommens und der darin enthaltenen Rechte und

Pflichten werden durch die Gesetze des Staates von New York bestimmt. Sollten sie diese
Vereinbarungen annehmen, dann akzeptieren Sie, dass der ausschliessliche Erfüllungsort
und Gerichtsstand bei den Gerichten von New York im Staat New York liegen hinsichtlich aller
Streitigkeiten, die diesen Vertrag betreffen, oder die durch Leistung oder Missbrauch der
besagten Software entstehen.

15. Merit kann nach eigenem Ermessen dieses Abkommen oder jedes der darin enthaltenen

Rechte und Pflichten an Dritte abtreten.

16. Bei Rückfragen über dieses Abkommen oder wenn Sie den Lizenzgeber aus einem anderen

Grund kontaktieren wollen, bitte schreiben an: Merit Industries, Inc., 155 Rittenhouse Circle,
Bristol, PA 19007, USA.

15 MEGATOUCH ENTERTAINER CONVERSION KIT PM0680-01