COPYRIGHT © 2009 MERIT INDUSTRIES, INC.
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion Rx
Megatouch Ion Technical Reference Manual
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
Removal/Installation of Major Assemblies -
Ion Rx
Credit Card Reader Removal
1. Turn off and unplug the game.
2. Unlock the game, then open it by pulling the rear of the top bezel forward.
3. Remove the 4 screws securing the credit card reader to the top bezel (see Figure 1).
Note: To gain
better access to the bottom screw on the reader, it may be easier to remove the thumbscrew that
secures the monitor support arm to the monitor (see Figure 2). If you remove the thumbscrew from
the monitor support arm, be very careful not to strain the cables that run from the system to the
monitor.
THUMBSCREW
SECURING MONITOR
SUPPORT ARM TO
MONITOR
LOCATION OF BUTTON TO
RELEASE MONITOR
SUPPORT ARM
MONITOR
SUPPORT ARM
FIGURE 1 - REAR OF CREDIT CARD READER
FIGURE 2 - REAR VIEW OF MONITOR ASSEMBLY
4 SCREWS SECURING
CREDIT CARD READER
CREDIT CARD READER
CABLE CONNECTOR