COPYRIGHT © 2004 MERIT INDUSTRIES, INC.
Troubleshooting Information - Removal/Installation of Motherboard -
EZ MAXX/MAXX Elite
Megatouch FORCE Technical Reference Manual
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Motherboard -
EZ MAXX/MAXX Elite
Motherboard Removal
1. Turn off and unplug the game.
2. Unlock and open the rear door.
3. Use the
Motherboard Diagrams
section to determine the board type in your game, then
disconnect all connections to the board. NOTE: Be sure to read the Motherboard Handling
Precautions before handling the board.
4. Remove the 2 screws securing the motherboard assembly to the shelf and the 2 screws
holding the 2 standoffs mounted to the shelf. After removing the standoffs, remove the
board and insert it into an anti-static bag for storage.
Motherboard Installation
1. Place the new motherboard in the game and mount the 2 standoffs to the shelf. Also secure
the motherboard to the shelf with the 2 screws.
2. Reconnect all connections to the motherboard.
3. Close and lock the rear door.
4. Plug in and turn on the game.