EVO Stand Installation Instructions 

 

 
 
 

 
 

PM0536-03 

EVO STAND INSTALLATION INSTRUCTIONS 

PAGE 1 OF 1 

 

EVO Stand Installation Instructions 

CONTENTS:

 

 

 

 

 

1.  Turn off the game and disconnect it from its power source. 

2.  Insert the provided screw all the way into the provided metal plate. 

3.  Carefully turn the game on its side.  Insert the metal plate under the lazy Susan as shown in Figure 1.  

The head of the screw should be closest to the game.  See Figure 1. 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 

4.  Carefully turn the game over, line up the screw in the bottom of the game with the hole in the top of 

the stand, and place the game on the stand. 

5.  Unlock and open the back door of the stand. 

6.  Secure the game to the stand by installing the provided washer and nut on the screw inside the 

stand. 

7.  Plug in the game and turn on the power. 

NOTE:  If you are installing a Premiere Tournament game, a chain and padlock have been 
provided to offer additional security.  Route the chain through the U-bolt on the back of the game 
and secure it to a stationary, secure device using the padlock.

 

QTY PART 

NO. 

DESCRIPTION 

1 WD0048-01 

EVO 

STAND 

1 MW1067-01 

MOUNTING 

PLATE 

1 

HW0271-02 

¼ x 20 x 3 ½ MACHINE SCREW  

1 

HW5554 

¼ x 20 WASHER 

1 

HW3310 

¼ x 20 WINGNUT 

FIGURE 1 - EVO GAME ON SIDE WITH SCREW AND METAL PLATE INSTALLED 

METAL PLATE 
INSTALLED IN 
LAZY SUSAN 

SCREW 
INSTALLED IN 
METAL PLATE 

LAZY SUSAN