COPYRIGHT © 2006 MERIT INDUSTRIES, INC. 

 

TN85

 

Tech Notes

 

Page 1 of 1 

 

Tech Notes

 

 

Date: 9-7-06 

merit industries, inc.

Re: 

Testing the Coin Mech and Bill Acceptor in Megatouch Games 

Megatouch software provides a screen in operator setup to allow for bill acceptor and coin mech testing.  

If you are testing the coin mech or bill acceptor in your game, you should only use this I/O Test Screen in 

order to perform testing.  Testing the bill acceptor any other way will accrue money on the game, which 

can affect the value of a credit and therefore affect cash settlement fees for premium services related to 

linked music and certain games.  To test the coin mech and/or bill acceptor, follow the steps below. 

1.  Press the SETUP button to enter operator setup. 

2. Touch 

the 

Diagnostics

 button and then touch 

I/O Test

. 

3.  Test the bill acceptor and/or coin mech by inserting money and ensuring that it registers correctly 

on the Diagnostics Screen.  A green light next to the appropriate channel will register each time 

that channel is tested, and the number next to the channel should increment appropriately with 

each test.  

NOTE:  On most U.S. games, one dollar will give you 4 pulses. 

If you have any questions, please contact Merit Customer Service and Technical Support by phone at 

215-639-4700 or 800-445-9353, or by e-mail at 

TechCenter@meritind.com

. 

 

 

http://www.meritind.com