COPYRIGHT © 2003 MERIT INDUSTRIES, INC.
TN72
Tech Notes
Page 1 of 1
Tech Notes
Date: 10-28-03
merit industries, inc.
Re:
I/O Board Replacement in FORCE EVO and Fusion Games
When replacing the I/O board in a FORCE EVO or Fusion game, make sure the jumper setting at JP7
(see Figure 1) on the board is correct:
•
For EVO games with Imonex 2-channel coin mechs, the shunt must be removed at JP7.
•
For Fusion games and all other EVO games, the shunt must be in place at JP7.
If you have any questions, please contact Merit Customer Service and Technical Support by phone at
215-639-4700 or 800-445-9353, or by E-mail at
TechCenter@meritind.com
.
http://www.meritind.com
FIGURE 1 – I/O BOARD
J1
USB
CONNECTOR
DIP SWITCH
BANK
JP7
CALIBRATE
SETUP
REMOTE SETUP/
CALIB/KEY TO J2
ON OSD BOARD
SECURITY
KEY