COPYRIGHT © 2000 MERIT INDUSTRIES, INC.

TN41.doc  08/07/00

Tech Notes

Page 1 of 1

Tech Notes

Tech Notes

http://www.meritind.com

merit industries, inc.

Date: 08-07-00

Re: Using a CD-ROM to Update a MAXX™ game

When performing a CD update, it is recommended that you use a CD-ROM drive
of at least 8X or better that is capable of operating on an angled surface, as you
may not always have a level surface on which to place the drive.

You must also configure your CD-ROM drive as the Master Drive in order to
perform this upgrade

.  See Figure 1 below for typical master drive jumper

location.

Figure 1 - Typical Location of Master/Slave Jumpers

IDE INTERFACE

CONNECTOR

DC (POWER)

INPUT

MASTER/SLAVE

JUMPERS

PIN 1