COPYRIGHT © 2008 MERIT ENTERTAINMENT
TN109
Tech Notes
Page 1 of 1
NOVRAM
CONNECTOR
NOVRAM
CABLE
CONNECTOR BETWEEN
NOVRAM CABLE AND
TOUCHSCREEN RIBBON
Tech Notes
Date: 4-7-08
merit entertainment
Re:
Touchscreen Replacement and the NOVRAM Cable
If you have to replace a touchscreen for any reason, be sure that the new touchscreen comes with its
own NOVRAM cable (see Figure 1), and be sure to use this new cable with your new touchscreen. Every
NOVRAM cable contains calibration data in the NOVRAM connector, and this data is unique to its own
particular touchscreen. If a NOVRAM cable is used with any other touchscreen than the one it was
specifically manufactured with, the touchscreen calibration will be off and it will not work properly.
Additionally, when buying a new touchscreen, be sure that the seal on the connector between the
NOVRAM cable and the touchscreen ribbon (see Figure 1) is not broken. If it is broken, it may be an
indication that the NOVRAM cable is not calibrated for that particular touchscreen. If you receive a
touchscreen with the seal broken or missing the NOVRAM cable, please contact your supplier to resolve
the issue.
If you have any questions please contact Merit Customer Service and Technical Support by phone at
800-523-2760 or 215-826-1400, or by e-mail at
TechCenter@meritgames.com
.
http://www.meritgames.com
FIGURE 1 – CONNECTION BETWEEN NOVRAM CABLE AND
TOUCHSCREEN RIBBON