COPYRIGHT © 1997 MERIT INDUSTRIES, INC.

TN09.doc  11/24/98

Tech Notes

Page 1 of 1

7HFK1RWHV

Date:  3-18-97

merit industries, inc.

Re:

Installing new power supplies into rear-access, 19” upright,
Megatouch XL games.

If attempting to install a new power supply into 19” upright
Megatouch XL games, with serial numbers 560001 to 560435,
you will need to make a change to the main harness (SA0024-
02), where it connects with the power supply, for the game to
work properly.

After removing the existing power supply and before installing
the new power supply, locate the 4-pin Molex connector [on the
main harness], that connects the main harness to the power
supply (the connector is located on the left side of the PC shelf,
next to the CPU assembly). Remove the two (2) yellow wires
(12V DC) from Pin 4 and insert them into Pin 1 of that
connector. You can now install the new power supply and the
game will work properly.