COPYRIGHT © 1997 MERIT INDUSTRIES, INC.
TN07.doc 11/24/98
Tech Notes
Page 1 of 1
Date: 3-5-97
merit industries, inc.
7HFK1RWHV
Re:
Over-torquing the screws, securing the I/O board standoffs to
the motherboard, in Megatouch XL games.
When reinstalling the I/O board on any XL game, be
extremely
careful not to over-tighten the screws securing the I/O board
standoffs. Over-tightening can cut traces on the board, causing
the board to short out when power is applied.
Merit recommends
no more than 9 in./lb. of tourque for
tightening the screws. It is also necessary to replace the
existing sems screws (screws
with star washers) with
#6-32 x 1/4 machine screws (screws
without star washers).
If you have any questions, contact Merit Customer Service at
1-800-445-9353.